5.03.2009

Setting Adsl Modem TP-Link

Setting Adsl Modem TP-Link

Post under
Adsl Modem TP-Link
Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
1.Klik Advanced Setup
2.Klik WAN
3.Find VPI/VCI: 8/81, Klik Edit
4.ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5.Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6.Cheklist Enable Bridge Service, Service Name: Speedy, Next
7.WAN Setup - Summary, Save
8.Save/Reboot


Setting PPPoE:
1.Klik Advanced Setup
2.Klik WAN
3.Find VPI/VCI: 8/81, Klik Edit
4.ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5.Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6.Put your PPP Username: 1524282xxxxx @telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
7.Cheklist Enable WAN Service, Service Name: Speedy, Next
8.WAN Setup - Summary, Save
9.Save/Reboot

Digg Google Bookmarks reddit Mixx StumbleUpon Technorati Yahoo! Buzz DesignFloat Delicious BlinkList Furl

1 komentar: on "Setting Adsl Modem TP-Link"

ardyano BloG mengatakan...

mau tanya nih..bozz.Saya coba setting modem TP-Link TD-8817 kalo saya setting bridge bagus tapi kalo saya setting ppoe waduh lemot sekali boleh dikata ngadat.saya mengalami hal yang sama untuk settingan modem Articonet ACN 110R 2C.Mohon pencerahannya.terimakasih

30 September 2009 pukul 19.25

Posting Komentar

Langganan: Posting Komentar (Atom)