Setting Adsl Modem TECOM

AR1031
Default ip: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:
1.Klik Advanced Setup
2.Klik WAN
3.Klik Edit
4.ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5.Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6.Cheklist Enable Bridge Service, Service Name: Speedy, Next
7.WAN Setup - Summary, Save
8.Save/Reboot


Setting PPPoE:
1. Klik Advanced Setup
2. Klik WAN
3. Klik Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Put your PPP Username: 1524282xxxxx @telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
7. Cheklist Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot